2011

• C. Leyens, J. Lindemann, R. Steinert: Effect of nitride coatings on the wear and fatigue behavior of titanium alloy Ti-6Al-4V; 12. World Conference of Titanium; Peking; China; 19-24.06.2011
• Q.M. Wang, W. Garkas, A. Flores Renteria, C. Leyens, H.W. Lee, K.H. Kim; 2011: Oxidation behaviour of Ti–Al–C films composed mainly of a Ti2AlC phase; Corrosion Science 53 (2011); pp 2948–2955
• J. Lindemann; C. Leyens; M. Glavatskikh; 2011: Surface Effects on the Mechanical Properties of Gamma Titanium Aluminides, Materials Sciene Forum Vols. 706-709 (2011); Thermec 2011 (conference); Quebec; Kanada; 01.-05.08.2011
• J. Lindemann, S. Bolz, M. Oehring, F. Pyczak, D. Roth-Fagaraseanu: Microstructure and Mechanical Properties of a Forged New Beta-Phase Containing Gamma Titanium Aluminide Alloy; 4th International Workshop on Titanium Aluminides; Nürnberg; 13.-16.09.2011
• E. Schwaighofer, M. Schloffer, T. Schmoelzer, S. Mayer, J. Lindemann, V. Guether, J. klose, H. Clemens; Microstructural Optimization of a Cast and Hot-isostatically pressed TNM(TM) Alloy by Heat Treatments
• Q. Wang, W. Garkas, A. Flores Renteria, C. Leyens, C. Sun, K. Kim: Oxidation behaviour of a Ti2AlN MAX-phase coating; IOP Conf. Series: Materials Science and Engineering 18 (2011)
• O. Schroeter: Herstellung und Charakterisierung von PVD-Schichten auf Basis der Cr2AlC-Max-Phase (Dissertation)
• M. Glavatskikh: Verbesserung des Ermüdungsverhaltens von Gamma-TiAl-Legierungen durch mechanische Oberflächenbehandlung (Dissertation)

2010

• Q.M. Wang, R. Mykhaylonka, A. Flores Renteria, J.L. Zhang, C. Leyens, K.H. Kim; 2011: Improving the high-temperature oxidation resistance of a β-γ TiAl alloy by a Cr2AlC coating, Corrosion Science 52 (2010), pp 3793-3802
• Wang, Q.M.; Flores Renteria, A.; Schroeter, O.; Mykhaylonka, R. ; Leyens, C.;  Garkas, W.; to Baben, M. ; 2010: Fabrication and oxidation behavior of Cr₂AlC coating on Ti6242 alloy. Surface & Coatings Technology 204 (2010) 15, pp 2343-2352, 0257 - 8972, article in press
• Garkas, W.; Leyens, C.; Flores Renteria, A.; 2010: Synthesis and characterization of Ti2AlC and Ti2AlN MAX phase coatings manufactured in an industrial-size coater, Advanced Materials Research Vols. 89-91 (2010), pp 208-213
• Zhang, P.; Lindemann, J.; Leyens, C.; 2010: Shot Peening on the High-Strength Wrought Magnesium Alloy AZ80 – Effect of Peening Media, Journal of Materials Processing Technology 210 (2010), 445
• Zhang, P.; Lindemann, J.; Leyens, C.; 2010: Influence of shot peening on notched fatigue strength of the high-strength wrought magnesium alloy AZ80, Journal of Alloys and Compounds (2010)
• Zhang, P.; 2010: Smooth and notched fatigue performance of aging treated and shot peened ZK60 magnesium alloy, Journal of Materials Research 25 (2010)
• Zhang, P.; 2010: Fatigue behavior of hot-extruded Mg-10Gd-3Y magnesium alloy, Journal of Materials Research 25 (2010), 4

2009

• Steinert, R.; Lindemann, J.; Berdova, O.; Glavatskikh, M.; Leyens, C.; 2009: Surface effects on mechanical properties of materials for elevated temperature applications. EUROMAT 2009 (conference), Glasgow, Schottland, 08.09.2009-10.09.2009
• Zhang, P.; Ding, W. J.; Lindemann, J.; Leyens, C.; 2009: Mechanical Properties oft the Hot-Rolled Mg-12Gd-3Y Magnesium-Alloy, Materials Chemistry and Physics 118 (2009), 453
• Zhang, P.; Flores Renteria, A.; Leyens, C.; 2009: Oxidation-resistant Ti-90Al coatings with lotus effect surfacemorphology deposited on a gamma-TiAl alloy, Scripta Materialia 61 (2009) 12, pp 1156-1159, 1359-6462
• Stranzenbach, M.; 2009: Entwicklung von integrierbaren Impedanz-NOx-Gassensoren für den Hochtemperatureinsatz in extremen Bedingungen, Dissertation (2009)
• Zhang, P.; 2009: High cycle fatigue behaviour of as-extruded ZK60 magnesium alloy, Journal of Materials Science 44 (2009) 11, pp 2916-2924
• Zhang, P.; 2009: Effect of Shot Peening on Surface Characteristics an Fatigue Properties of T5-treated ZK60 Alloy, Materials Transactions 50 (2009) 4, pp 791-798, 1345-9678
• Kohns, A.; 2009: Erosionsschutzschichten für Blisk-Verdichtertrommeln: Prozessentwicklung und Eigenschaften, Dissertation (2009)
• Zhang, P.; 2009: Effect of Shot Peening on High Cycle Fatigue Performance of Mg-10Gd-3Y-0.5Zr Magnesium Alloy, Magnesium Technology 2010: Fatigue, Failure an Wear (2009)
• Leyens, C.; 2009: Influence of different annealing processes under various atmospheres on the oxidation behavior of gamma-TiAl, Materials at High Temperatures 26 (2009) 1, pp 91-98
• Leyens, C.; 2009: Oxidation Behaviour of TBC Systems on gamma-TiAl Based Alloy Ti-45Al-8Nb, Oxidation of Metals 71 (2009) 5-6, pp 295-318, 0030-770X

2008

• Glavatskikh, M.; Lindemann, J.; Leyens, C.; Oehring, M.; Appel, F.; 2008: Surface Strengthening for Enhanced Fatigue Performance of Gamma Titanium Aluminides, Structural Aluminides for Elevated Temperatures (Y.-W. Kim, D. Morris, R. Yang, C. Leyens, Eds.) TMS (2008) 111
• Lindemann, J.; Glavatskikh, M.; Leyens, C.; Roth-Fagaraseanu, D.; 2008: Effect of Small Boron and Carbon Additions on the Mechanical Properties of a Novel High Niobium-Containing Gamma Titanium Aluminide Alloy, Structural Aluminides for Elevated Temperatures (Y.-W. Kim, D. Morris, R. Yang, C. Leyens, Eds.) TMS (2008) 257
• Roth-Fagaraseanu, D.; 2008: Entwicklung und Bewertung von Herstellprozessen für TiAl Verdichterschaufeln, Dissertation (2008)
• Leyens, C.; 2008: Oxidation characteristics of gamma-TiAl-8Nb coatet with CrAlYN/CrN nanoscale multilaer coating, Structural Aluminides for High Termperature Applications (2008), pp 315-322
• Leyens, C.; 2008: Ti-Al-Cr-X coatings for Hight Temperature oxidation protection of gamma titanium aluminides, Structural Aluminides for High Termperature Applications (2008), pp 333-340
• Leyens, C.; 2008: Influence of different annealing processes on the oxidation behaviour of gamme-TiAl, Proc. 7th International Conference on Microscopy of Oxidation, Chester, UK (2008)
• Leyens, C.; 2008: Improvement of the High Temperature Oxidation Resistance of gamme-TiAl by Selectively Pre-treated Si-based Coatings, Advanced Engineering Materials 20 (2008) 7, pp 675-677, 1527-2648
• Leyens, C.; 2008: Thermally grown oxide scales on gamma-TiAl coated with thermal protection systems, Proc. 7th International Conference on Microscopy of Oxidation, Chester, UK (2008)
• Leyens, C.; 2008: Performance of thermal barrier coatings on gamma-TiAl, Schütze, Michael (Hrsg.): Novel approaches to improving High Temperature corrosion resistance (2008), pp 249-263, 978-1-8456-9238-4
• Leyens, C.; 2008: Oxidation behaviour of the gamma-TiAl based alloy Ti-45Al-8Nb coated with TiAlYN and CrAlYN thin films, Structural Aluminides for High Temperature Applications (2008), pp 289-296
• Leyens, C.; 2008: Investigation on the oxidation behaviour of gamma titanium aluminides coated with thermal barrier coatings, Materials and Corrosion 59 (2008) 7, pp 539-546, 0947-5117
• Leyens, C.; 2008: Environmental protection of gamaa-TiAl alloys coated with CrAlYN/CrN nanoscale multilayer coatings and EB-PVD thermal barrier coatings, Structural Aluminides for High Temperature Applications (2008), pp 341-348
• Leyens, C.; 2008: Wire instead of powder? - Properties of additive manufactured Ti-6Al-4V for aerospace applications, Proc. EURO-RAPID 2008 in Berlin (2008)

2007

• Lindemann, J.; Glavatskikh, M.; Leyens, C.; Oehring, M.; Appel, F.; 2007: Influence of Mechanical Surface Treatments on the High Cycle Fatigue Performance of Gamma Titanium Aluminides, Ti-2007 Science and Technology (M. Niinomi et al, Eds.), The Japan Institute of Metals (2007) Vol. II, 1703.
• Lindemann, J.; Kutzsche, A.; Oehring, M.; Appel, F.; 2007: Influence of Mechanical Surface Treatments on the Fatigue Performance of the Gamma TiAl Alloy Ti-45Al-9Nb-0.2C, Materials Science Forum Vols. 539-543 (2007), 1553.
• Zhang, P.; Lindemann, J.; Leyens, C.; 2007: Surface Rolling on the High-Strength Wrought Magnesium Alloy AZ 80, Magnesium – Proceeding of the 7^th International Conference on Magnesium Alloys and Their Applications (K. U. Kainer, Ed.) WILEY-VCH-Verlag, Weinheim (2007) 613.

2006

• Düring, M.; Karabet, A.; Viehweger, B.; Lindemann, J.; Zhang, P.; 2006: Magnesium-Knetlegierungen: Innovative Leichtbauwerkstoffe für den Automobilbau, Forum der Forschung: Wissenschaftsmagazin 10 (2006) 19, 41.
• Fröhlich, M.; Braun, R.; Leyens, C., 2006: Oxidation resistant coatings in combination with thermal barrier coatings on g-TiAl alloys for high temperature applications. ICMCTF San Diego 2006, San Diego, CA (USA), 01.05.2006-05.05.2006
• Fröhlich, M.; Braun, R.; Leyens, C., 2006: Development of Magnetron Sputtered TiAlx Coatings for Optimised Oxidation Protection of Titanium Aluminides for High Temperature Applications. PSE 2006, Garmisch-Partenkirchen, Deutschland, 10.09.2006-15.09.2006
• Lindemann, J., Appel, F., 2006: Surface strengthening for enhancing fatigue performance of a lamellar titanium aluminide alloy. In: Proceedings of 3rd International Workshop on Gamma-TiAl Technologies, Bamberg, Germany, 2006
• Lindemann, J., Kutzsche, A., Oehring, M., Appel, F., 2006: Influence of mechanical surface treatments on the fatigue performance of the Gamma-TiAl alloy Ti-45Al-9Nb-0.2C. In: Proceedings of the International Conference on Processing and Manufacturing of Advanced Materials THERMEC`2006, Vancouver, Canada, 2006
• Flores Renteria, A.; Saruhan, B.; Ilavsky, J., 2006: Determination of the relation between the process controlled variations of anisotropic void system and thermal conductivity of electron beam – physical vapor deposited PYSZ Thermal Barrier Coatings. In: Advanced Ceramic Coatings and Interfaces, Ceramic Engineering and Science Proceedings, Cocoa Beach, Volume 27, Issue 3, S. 3-15
• Leyens, C.; Braun, R.; Fröhlich, M.; Hovsepian, P. Eh., 2006: Recent Progress in the Coating Protection of Gamma Titanium-Aluminides, Journal of Metals, 58, S. 17-21, January 2006
• Fröhlich, M.; Braun, R.; Leyens, C., 2006: Oxidation resistant coatings in combination with thermal barrier coatings on g-TiAl alloys for high temperature applications, Surface & Coatings Technology, 201, S. 3911-3917
• Lindemann, J.; Buque, C.; Appel, F., 2006: Effect of shot peening on the fatigue performance of a lamellar titanium aluminide alloy. In: Acta Materialia 54, S. 1155-1164
• Flores Renteria, A.; Saruhan, B.; Schulz, U.; Raetzer-Scheibe, H.-J.; Haug, J.; Wiedemann, A., 2006: Effect of morphology on thermal conductivity of EB-PVD PYSZ TBCs. Surface and Coatings Technology, 201, 6, S. 2611-2620
• Saruhan, B.; Flores Renteria, A.; Keshmiri, M.; Troczynski, T., 2006: Liquid-phase-infiltration of EB-PVD-TBCs with ageing inhibitor. Journal of the European Ceramic Society, 26, 1-2, S. 49-58
• Flores Renteria, A.; Saruhan, B., 2006: Effect of ageing on microstructure changes in EB-PVD manufactured standard PYSZ top coat of thermal barrier coatings. Journal of the European Ceramic Society, 2, 12, S. 2249-2255
• Haug, J.; Wiedemann, A.; Flores Renteria, A.; Saruhan-Brings, B.; Strunz, P., 2006: Evolution of pore microstructure in thermal barrier coatings studied by SANS. Physica B: Condensed Matter, 385-386, 1, S. 617-619
• Flores Renteria, A., 2006: Influence of the geometrical and spatial characteristics of the porosity on the thermal conductivity of EB-PVD TBCs. Journal of Thermal Spray Technology, 1, S. 29-30
• Zhang, P.; 2006: Influence of texture and microstructure on mechanical properties of high-strength wrought magnesium alloy AZ80, Transactions of Nonferrous Metals Society of China (English Edition) 16 (2006) 3, pp 1754-1757

2005

• Zhang P., Lindemann J., Kiefer A., Leyens C.; 2005: Mechanical surface treatments on the high-strength wrought magnesium alloy AZ80, Proceedings of the 4th International Conference on Shot Peening, IITT-Institute of Industrial Technology Transfer (2005) 308-313
• Zhang P., Lindemann J.; 2005: Effect of roller burnishing on high cycle fatigue performance of the high-strength wrought magnesium alloy AZ80, Scripta Materialia 52 (2005) 1011-1015
• Janecek M., Šupik V., Holländer F., Wendt J.; 2005: The influence of preheating temperature on the mechanical properties of AZ31 magnesium alloys after hot-rolling, Kovove Materialy 43 (2005) 218-228
• Zhang P., Lindemann J.; 2005: Influence of the shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ80, Scipta Materialia 52 (2005), pp 485 – 490
• Zhang P.; 2005: Creep behavior of the die- cast MG- Al alloy AS21, Scipta Materialia 52 (2005), pp 277 – 282
• Peters M., Schulz U., Saruhan-Brings B., Leyens C.; 2005: Advanced thermal barrier coatings for future aero engines, Proc. ISABE 2005, München, eingereicht
• Braun R., Leyens C.; 2005: Protective coatings on orthorhombic Ti2AlNb alloys, Materials at High Temperatures (2005), eingereicht
• Bach P., Brinksmeier E., Enning H.-J., Freund D., Friedrich D., Kappmeyer G., Klocke F., Kuckuk A., Leyens C., Mader S., Maier B., Prefi T., Röttger K., Siry C., Stotko C., Zeppenfeld C.; 2005: “Alleinstellungsmerkmale für die zukünftige Produktion in Deutschland“, AWK’05, eingereicht
• Lau H., Leyens C., Schulz U.; 2005: Microstructure and morphology of thermally grown oxides on NiCoCrAlY - Part 1: Early stage oxidation and off-plane mixed zone formation, Oxidation of Metals, eingereicht
• Güther V., Janschek P., Kerzendorf G., Lindemann J., Schillo E., Viehweger B., Weinert K.; 2005: Entwicklung und Erprobung eines g-TiAl-Pleuels für Verbrennungsmotoren, Spanende Fertigung - Prozesse, Innovationen, Werkstoffe (K. Weinert, Hrsg.) Vulkan-Verlag, Essen (2005) 363.
• Leyens, C.; Peters, M.; 2005: Titanium and Titanium Alloys 2005: Chemical Industry Press, China, ISBN 7-5025-6408-X/TG
• Zhang, P.; 2005: Creep deformation mechanismus in high pressure die-cast magnesium base alloys, Metallurgical and materials transactions A (2005) 36A, pp 1721-1728

2004

• Zhang P., Wendt J., Šupik V., Zhang J., Holländer F.; 2004: Superplasticity in Hot- rolled Magnesium Alloy AZ31 Sheets, Magnesium – Proceedings of the 6th International Conference on Magnesium Alloys and Their Applications (K. U. Kainer, ed.), WILEY – VCH Verlag, Weinheim (2004) 248
• Wendt J., Šupik V., Zhang P., Zhang J.; 2004: Mechanical Properties of Hot- rolled Magnesium AZ31 Sheets, Magnesium – Proceedings of the 6th International Conference on Magnesium Alloys and Their Applications (K. U. Kainer, ed.), WILEY – VCH Verlag, Weinheim (2004) 439
• Schulz U., Saruhan B., Fritscher K., Leyens C.; 2004: Review on advanced EB-PVD ceramic top coats for TBC applications, Int. J. of Appl. Cer. Techn. (2004), eingereicht
• Fritscher K., Schubert O., Leyens C., Schulz U.; 2004: Characterization of oxide scales formed on Ni-Cr-Al-Ta-Re cast alloys after oxidation at 1000°C for 500 hours, Oxidation of Metals (2004), eingereicht
• Peters P.W.M., Leyens C.; 2004: Langfaserverstärkte Titanlegierungen, Konstruktion 5 (2004) IW6-8
• Brendel A., Popescu C., Leyens C., Wolterdorf J., Pippel E., Bolt H.; 2004: SiC-fibre reinforced copper as heat sink material for fusion applications, Journal of Nuclear Materials 329-333 (2004), pp 804-808
• Braue W., Fritscher K., Schulz U., Leyens C., Wirth R.; 2004: Nucleation and growth of oxide constituents on NiCoCrAlY bond coats during the different stages of EB-PVD TBC deposition and upon thermal loading, Materials Science Forum (2004), im Druck

2003

• J. Lindemann, D. Roth-Fagaraseanu and L. Wagner: Notch Effects on HCF Strength of Gamma Titanium Aluminides, Ti-2003, Titanium Science and Technology (G. Lütjering, ed.) WILEY-VCHVerlag, Weinheim (2003), 2425
• J. Zhang, J. Lindemann and L. Wagner: Influence of Prior Deformation on the Development of Duplex Microstructures and Fatigue Strengths in Ti 6242, Ti-2003, Titanium Science and Technology (G. Lütjering, ed.) WILEY-VCH-Verlag, Weinheim (2003),1823
• J. Lindemann, K. Grossmann and L. Wagner: Influence of Mechanical Surface Treatments on the HCF Performance of the Ni-Superalloy Udimet 720 Li, Zeitschrift für Metallkunde 94 (2003) 6, 711.
• C.Leyens, R. Braun: Environmental and thermal protection of gamma titanium aluminides, Materials Science Forum, 2003,
• K. Fritscher, C. Leyens, U. Schulz: Investigation of an as-sprayed NiCoCrAlY overlay coating. A thermodynamical approach, Materials Science and Engineering 2003,
• J. Hausmann, C. Leyens, W. A. Kaysser: Interaction between cylic loading and residual stresses in titanium matrix composites, Journal of Materials Science, 2003,
• M. Peters, U. Schulz, J. Hausmann, C. Leyens: Advanced materials and coatings for future gas turbine technology, Proc. Deutscher Luft- und Raumfahrtkongress, 2003, DGLR, München,
• J. Hausmann, S. Emura, C. Leyens: Cyclic behavior of transverse loaded titanium matrix composites, Proc. Materials Science and Technology, 9.-12.11.2003, Chicago, 2003,
• C. Leyens, R. Braun, P. Eh. Hovsepian, W.-D. Münz: "Environmental protection of gamma titanium aluminides", in: Gamma Titanium Aluminides, Y.-W. Kim, H. Clemens, A. H. Rosenberger (eds.),TMS, Warrendale, 2003, 551-557
• J. Hausmann, C. Leyens, W. A. Kaysser: "The way of optimisation of the fatigue resistance of titanium matrix composites - models and experiments", 10th World Conference on Titanium, Hamburg, 2003, 2593-2600
• C. Leyens, J. Hausmann, J. Hemptenmacher: "Titanium matrix composites for demnading structural aerospace applications", 10th World Conference on Titanium, Hamburg, 2003, 2907-2914
• C. Leyens, R. Braun, M. Peters: "Environmental and thermal protection of gamma titanium aluminides", 10th World Conference on Titanium, Hamburg, 2003, 2441-2448
• M. Peters, J. Kumpfert, C. H. Ward, C. Leyens: Titanium alloys for aerospace applications, Advanced Engineering Materials 5 (6), 419-427, 2003.
• C. Leyens, J. Hausmann, J. Kumfpert: Continuous fiber reinforced titanium matrix composites: fabrication, properties and applications, Advanced Engineering Materials 5 (6), 399-410, 2003.
• U. Schulz, K. Fritscher, B. Saruhan-Brings, C. Leyens, M. Peters, W.A. Kaysser: "Some recent trends in research and technology of advanced thermal barrier coatings", Aerospace Science and Technology 7 (1), 73-87, 2003.
• M. Peters, C. Leyens: "Non-aerospace applications of titanium and titanium alloys", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, 393-422.
• M. Peters, J. Kumpfert, C. Ward, C. Leyens: "Titanium in aerospace applications", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, 333-350.
• C. Leyens, J. Hausmann, J. Kumpfert: "Continuously fiber reinforced titanium matrix composites: fabrication, properties and applications", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, 305-331.
• M. Peters und C. Leyens: "Fabrication of titanium alloys", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, 245-261.
• C. Leyens: "Oxidation and protection of titanium alloys and titanium aluminides", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, 187-230.
• J. Kumpfert, C. Leyens: "Orthorhombic titanium aluminides: intermetallics with improved damage tolerance", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, S. 59-88.
• M. Peters, J. Hemptenmacher, J. Kumpfert, C. Leyens: "Structure and properties of titanium and titanium alloys", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, S. 1-36.
• M. Peters und C. Leyens: “Aerospace and Space Materials,” in UNESCO Encyclopedia on Life Support Systems: EOLSS Publishers, 2003.
• C. Leyens, F. Kocian, J. Hausmann, W. A. Kaysser: "Materials and design concepts for high performance compressor components", Aerospace Science and Technology, 7 (3), 201-210, 2003.
• C. Leyens, J. Hausmann, J. Kumpfert: "Continuously fiber reinforced titanium matrix composites: fabrication, properties and applications", in Titanium and Titanium Alloys - Fundamentals and Applications, C. Leyens und M. Peters (Hrsg.), Wiley-VCH, Weinheim, 2003, 305-331.
• J. Lindemann, D. Roth - Fagaraseann, L. Wagner: Mechanical Surface Treatments for Enhancing Fatigue Performance of Gamma Titanium Aluminides at Ambient an Elevated Temperatures, Gamma Titanium Aluminides 2003 (Y.- W. Kim, H. Clemens, A. Rosenberger, eds.) TMS, Warrendale, PA (2003) 509
• Haag M., Wanner A., Clemens H., Zhang P., Kraft O., Arzt E.; 2003: Creep of aluminium-based closed-cell foams, Metall. Mater. Trans. 34A (2003), pp 2809